How to Make & Use a Woven Wrap

View pdf tutorial here: Woven_Wrap_Tutorial.pdf

Woven Wrap Construction Basic Steps

1. Pick your length
2. Choose your fabric
3. Scour (osnaburg only)
4. Wash & Dry
5. Dye (optional)
6. Cut to width/length
7. Hem
8. Soften/Break In
9. Learn to use

Pick your length

Woven wraps come in a variety of sizes, and most sizes are usable to some degree by most wearers. It just changes what carries you can do. Most people learn on their "base size," which for a medium-sized person is usually a 6, but could be anywhere from a 4 to a 9. Click here to learn more about wrap sizing to choose the perfect size for you!

Woven wrap widths vary from 26-32" wide (70-80cm.) 29"-30" is generally considered a great width that will be good for newborn through toddlerhood.

Choose your fabric

There are a number of safe fabrics to use for a DIY woven wrap. Below are a few of the more popular choices. Whatever you choose, make sure to review the 4 Rules of Safe Fabric Selection to make sure it's safe to use!

Essentially, fabric for a wrap must pass 4 rules:

• Fiber Content (Natural fibers; no polyester, no spandex)
• Weight (men's pants or sturdy tote bag thickness)
• Weave (thick, visible threads; no stretch; tight weave)
• Care Instructions (machine washable)

Osnaburg

One of the most popular choices for DIY woven wraps because of it's low cost and great wrap qualities. Osnaburg is light, breathable, and easy to work with. It typically only comes naturally colored (with a few exceptions, especially internationally) which makes it an excellent dye blank. It does require scouring to clean it since it is not cleaned and processed like most fabrics, but scouring is not nearly as scary as it sounds. The downside is that most fabric store employees are not familiar with it and may not be able to help you find it. Either have them look it up in their computer, or simply search around the burlap and muslin. The bolt will say "osnaburg" clearly on the tag. It will usually be 100% cotton, although Walmart sells osnaburg with a 3% polyester blend which is fine to use.

Duck cloth

Duck is a canvas-like fabric. While it is a little stiffer than osnaburg and slightly less breathable (although only slightly), duck is often used because it breaks in for a nice floppy, supportive wrap and, more importantly, comes in gorgeous, colorful prints. The downside to duck is that the prints are one sided, so your wrap will have a blank "wrong" side.

Linen

100% linen is the gold standard for breathability in the heat, and known for its strength. It can crease (which is mostly just a visual issue) and takes longer to break in, but the linen from Fabrics-store.com comes pre-softened. Keep in mind that a lot of "linen" sold in fabric stores is actually "linen-like" fabric that is made from cotton, rayon, or even polyester. You also have to make sure the linen you are buying is an appropriate weight.

Scour (osnaburg only)

If you bought osnaburg, is MUST be scoured before hemming and using! This is a non-optional cleaning step necessary because osnaburg is an unprocessed fabric full of a lot of leftovers from the manufacturing process, and it will be in direct contact with your baby's skin (and likely their mouth.)

For instructions on how to scour osnaburg, click here.

Wash & Dry

Regardless of your fabric choice, you'll want to wash your fabric before you start in order to get any and all shrinkage out of the way up front. The general recommendation is to wash your fabric however you plan to wash it in the future, but I prefer to start with a very hot wash and hot dry to get any and all shrinkage out of the way in case someone were to "help" and wash my wrap for me.

You'll want to use a wrap-safe detergent. In general, wrap-safe detergents:

• Are free of dyes and fragrances (These can irritate baby's skin since they will be in lots of contact!)
• Have no added fabric softener (which can build up in the fabric and make knots slip)
• Are liquid, not powdered (powder can build up in the fibers and wear them out faster)
• Have no optical brighteners (OBs are avoided to protect the color. I have not yet found any evidence that they actually damage fabric.)

Dye

(Optional) Dye with a baby-safe dye. Join the Facebook group Dyed Baby Carriers for more info. Wraps CAN be dyed after hemming, but keep in mind that if you hem your wrap with a polyester thread, the thread will not take dye.

Cut to width/length and (optional) add tapers

Re-measure after washing and drying and cut to length if needed. Cut the width down to between 28-34” (for a finished hemmed width of 26”-32”.) If you bought a 57"-60” wide tablecloth or bolt fabric, you will simply need to cut it in half lengthwise to be (approximately, after shrinkage) 28” wide. Some fabrics, including osnaburg and duck, will “snip and rip” straight. Simply snip about 1" of the fabric at the right width and then rip it down the length. If you aren’t sure, test near an edge. Otherwise, you can measure and iron a straight line and then cut along the crease.

Click here for info on tapering your ends (optional, mostly just aesthetic.)

Hem your edges

Once your fabric is clean and the correct size, hem all four edges.

Hem with whatever method you are comfortable with. A double folded hem of between 1/4”-1/2” is typical. You can iron and pin your hems before sewing, use a rolled hemming foot, or just pinch press them like Jan does in this video. Serging not preferred, but is okay (although the rails will not be as strong, may irritate baby's skin, and may be more prone to damage.) Hemming by hand is tedious but safe.

If you really want perfect mitered corners, this is my favorite video that shows how to do it (yes, the video is about dinner napkins. The technique still applies.)

It doesn’t matter too much what thread you use for the hems. An all-purpose thread is fine. Just keep in mind that while polyester thread is stronger and less likely to break as you are tightening your rails (especially if your fabric has any give to it), if you plan on dyeing your wrap, polyester won’t take dye, so use a thread matching the FINAL color of your wrap. Unless you are an experienced sewer, avoid “heavy duty” thread, as these can jam up your machine if you aren’t used to adjusting the tension. Again, since hems aren’t “structural,” feel free to use a straight stitch, zigzag, or even a decorative stitch for your hems. The main point of the hem is just to keep the folded fabric in place.

If you don't have a sewing machine, after cutting your wrap to size, you can take the fabric to your local dry cleaners or alterations shop to have it hemmed! You can call for an estimate, but many will do it for anywhere between $5-$20.

Since the short ends of the tails do not receive the same kind of abuse and wear that the long rails do, you can choose to fringe the ends instead of hemming them.

Softening/"Breaking in" your wrap

New fabric is going to be very stiff and difficult to wrap with. Breaking in will help conquer onsaburg's scratchiness, linen's stiffness, and duck's thickness.

Good techniques to soften your wrap:

• Washing & tumble drying with tinnis balls/dryer balls*
• Steam ironing
• Sitting on it while you watch tv or drive
• Sleeping on it
• Leaving it in a warm car (out of the sun; sunlight can damage the fibers)
• Braiding and unbraiding repeatedly
• Running it back and forth through the crib rails
• Making a "wrap hammock" for your kids to play with by tying it around a sturdy table
• Knot dragging

*Note: linen and linen blends can actually be made stiffer by over-drying. Tumble dry linen until it is just barely dry, then finish drying by steam ironing. This method also helps keep osnaburg from getting scratchy after drying.

Learn to use it

Current BWI safety recommendations include wearing babies upright tummy to tummy (not in a cradle carry position) to help ensure a clear airway and legs outside of the wrap in an M position from birth to make sure the baby’s weight is on their bum instead of their feet. Make sure you are always following the TICKS rules for safe babywearing.

There are several videos on YouTube that can help you get started. If you need further help, look for a babywearing group locally or on Facebook. Learn a good starter carry (below) and then look up other carries on YouTube to branch out. Learn several front carries well before attempting a back carry, even if you are starting with a toddler. Good YouTube channels include Babywearing Faith, WrapYouInLove, WrappingRachel and Wraplena.

Good starter carries to learn:

• Front Wrap Cross Carry (FWCC) is the "standard" starter carry for a base-sized wrap.
• FWCC Tied Under Bum is good if your wrap is just barely too short for a FWCC, or if you have a midsize wrap.
• Front Reinforced Torso Sling (FRTS, formerly FRTR) is a good starter carry if you have a midsize wrap (approximately base-2)
• A Traditional Sling Carry, formerly called a Rebozo Carry, can be done with even the shortest of wraps. Similar to a ring sling without the rings.
• Kangaroo (for a short wrap) or Reinforced Kangaroo (for a longer wrap) is a little more challenging, but good practice for tightening before moving onto back carries.

For an extensive list of woven wrap carries based on size, click here!

-- Alyssa Leonard - 2016-07-16

Return to Main - TICKS Rules for Safe Babywearing